Home | Contact | Photos

 

photo of Flashing Bond /Flashing Bond WG

Flashing Bond®

Cold-applied, asphalt-based mastic used for patching and leak repair on asphalt roofing systems.

These cold-applied, asphalt-based mastics are used for patching and leak repair on asphalt roofing systems. The high solids asphalt content, double fiber reinforcement, and plasticizing oils improve low-temperature performance while also eliminating run or sag in vertical surface applications.


Product Advantages


Technical Data

 Flashing Bond
VOC Status 200 g/l
Flash Point 103°F (39.4°C)
Non-Volatile 70% min.

Coverage
Flashing install 2 - 3 gal./sq. (0.82 - 1.22 l/m2)
Flashing repairs 1/4" thickness
(6.3 mm thickness)
1 gal./7 lin. ft. covers 8" wide (0.27 m/l covers 20 cm wide)

Packaging

Flashing Bond
3 gallon (11.4 l) pail
5 gallon (18.9 l) pail


Approvals that apply to this product

UL Classified logo Miami-Dade County approved logo

(Both approvals apply to Flashing Bond only)


Certification/Validation

Currently no certifications