Home | Contact | Photos

 

photo of Perma-Joint Sealant

Perma-Joint Sealant / Perma-Joint Sealant FS

Hybrid, 100% solid sealants used to fill control and expansion joints in concrete floors

This sealant is used to fill control and expansion joints in concrete floors. Its unique hybrid formulation provides 50 percent elongation to allow for greater joint movement while maintaining an excellent joint seal. The combination of urethane and epoxy provides excellent adhesion and resiliency for long-term protection of joints and saw cuts. The FS version is a resilient, fast-setting joint material used in concrete and cement expansion joints.


Product Advantages


Technical Data

  Perma-Joint™ Sealant Perma-Joint Sealant FS
VOC status 0 g/l 0 g/L
Flexural Strength 2,700 psi NA
Tensile Strength 3,200 psi 1,900
Set Time @ 70°F (21°C)* Tack Free: 4 to 6 hours
Recoat or Topcoat: 10 to 12 hours
Light Foot Traffic: 16 to 24 hours
Full Cure: 3 to 5 days
Tack Free: 1 to 2 min.
Recoat or Topcoat: 1 hour
Light Foot Traffic: 1 to 3 hours
Full Cure: 3 to 5 days
Coverage 2 gallon (7.5 l): 140 lf. at 1/2 in. x 1/2 in. wide
(42.67 m at 12.7 x 12.7 mm wide)
12 ft. (1/2” wide, 1/2” deep) per tube
3.6 m (1.3 cm wide, 1.3 cm deep

*Time and strength depends on air temperature and humidity.

Packaging

Perma-Joint Sealant - 2 gallon (7.6 l) pail

Perma-Joint Sealant FS - Case of 6 tubes


Approvals that apply to this product

Currrently no approvals


Certification/Validation

Currently no certifications

Request Product Info

Name:

Email:

Preferred Phone Number:

Zip:

Comments or Questions:

CODE HINT: uppercase "E", lowercase "m", lowercase "d"

CODE HINT: uppercase "E", lowercase "m", lowercase "d"