Coatings

Dura-Walk® CWH

Highly Sag Resistant
High-Performance Formula
Quick Curing

Dura-Walk CWH is a hot-applied, seamless waterproofing membrane. This 100 % solid rubberized, asphalt-based formula is fluid-applied to form a continuously-adhered waterproofing system over a variety of concrete substrates. Apply this flexible, high-build material to surfaces requiring a waterproofing layer before adding a covering (such as tile, concrete, pavers, or vegetative roof system). Dura-Walk CWH is a versatile waterproofing system, ideal for parking structures, walkways and terraces, roofs, and other instances requiring a monolithic waterproofing membrane.

Speak with a Rep

Product Specifications

Method	Description
Hot-Applied	Apply Dura-Walk CWH at 380-400º F (193.3-204.4º C) to the prepared surface by pouring or pumping from the melter at a minimum of 115 mils (0.115”) thick. Distribute the material evenly on the deck surface using a flat blade squeegee, approximately 18”-wide and 3/16 - 1/16” thick (45 cm wide and 0.48 – 0.16 cm thick). If bubbles or other outgassing appear, apply additional material. After base layer is applied, immediately roll in HPR ® Polyscrim Plus, or approved equal reinforcement, into the hot Dura-Walk CWH. When reinforcement is embedded, apply top layer of Dura-Walk CWH at least 100 mils (0.10”) thick. The total system height should be at least 215 mils (0.215”), but may be higher. Dura-Walk CWH system should be covered as soon as possible with either polyethylene sheeting, protection boards, roll roofing, pavers, or asphalt-saturated sheets. This protects the Dura-Walk CWH system from punctures, abrasions, and UV exposure. See Application Guide for general application guidelines, and project specifications for specific application instructions. Contact Garland's Technical Department with questions.

Method

Description

Hot-Applied

Apply Dura-Walk CWH at 380-400º F (193.3-204.4º C) to the prepared surface by pouring or pumping from the melter at a minimum of 115 mils (0.115”) thick. Distribute the material evenly on the deck surface using a flat blade squeegee, approximately 18”-wide and 3/16 - 1/16” thick (45 cm wide and 0.48 – 0.16 cm thick). If bubbles or other outgassing appear, apply additional material. After base layer is applied, immediately roll in HPR ® Polyscrim Plus, or approved equal reinforcement, into the hot Dura-Walk CWH. When reinforcement is embedded, apply top layer of Dura-Walk CWH at least 100 mils (0.10”) thick. The total system height should be at least 215 mils (0.215”), but may be higher. Dura-Walk CWH system should be covered as soon as possible with either polyethylene sheeting, protection boards, roll roofing, pavers, or asphalt-saturated sheets. This protects the Dura-Walk CWH system from punctures, abrasions, and UV exposure. See Application Guide for general application guidelines, and project specifications for specific application instructions. Contact Garland's Technical Department with questions.

Type	Link
Data Sheets	Dura-Walk CWH Technical Data Sheet
SDS	Dura-Walk CWH Safety Data Sheet
SDS	Dura-Walk CWH OSHA WHMIS GHS Safety Data Sheet
Benefits	Dura-Walk CWH Benefits

Features

Highly Sag Resistant

Dura-Walk CWH is easy to build into a thick, durable system – even while taking fewer steps than others. This formula flows easily into cracks and crevasses, bridging cracks up to 1/8” wide (as opposed to other formulas that bridge cracks up to only 1/16”). Dura-Walk CWH applies easily, and new coats can be applied to previous coats without rigorous preparation.

Get in Touch

Please complete the form below and a member of our team will be back in touch shortly. Or to contact your local Territory Manager directly, use the Find a Rep button at the top of this page.

Man Working Laptop Connecting Networking Concept

Modified Bitumen

KEE / Thermoplastic

Standing Seam Metal Roofing

Wall Panels & Rainscreens

Edge Metal

Metal Accessories

Restoration Systems

Metal

Modified Bitumen Roof Surface Coatings

Facades / Walls

Traffic Grade

Flooring

Garland's Process

Roof Assessment

Envelope Services

OMNIA Partners

Vizient

Premier Partners

GSA

CMAS (CA)

COMMBUYS (MA)

EducationPlus (MO)

Equalis Group (OH)

Vegetative Roofing

Solar Roofs

K-12

Higher Education

Garland Federal Division

Garland Federal Partner Program

Municipalities

Correctional Facilities

First Responders

Rec Centers & Natatoriums

Architects & Design Professionals

Coatings

Dura-Walk® CWH

Product Specifications

Technical Data

Application

Documents

Features

Highly Sag Resistant

High-Performance Formula

Quick Curing

Related Products

Green-Lock® Sealant XL

Tread-Shield®

Get in Touch