Garla-Block 2K is a water-based, low-odor, low-VOC epoxy primer formulated to prevent staining and improve coating adhesion over a variety of roof systems (smooth/granulated asphalt, concrete, and modified bitumen). Garla-Block 2K can be installed with solvent-based urethanes, water-based acrylics, and aluminized asphaltic coatings.
|
| Method | Description |
|---|---|
| Roller | Apply Garla-Block 2K at a rate of 0.5 gal./100 sq. ft. (0.21 l/m2 ) to the prepared substrate using a foam roller. |
| Spray | Apply Garla-Block 2K at a rate of 0.5 gal./100 sq. ft. (0.21 l/m2 ) to the prepared substrate using spray equipment (a 0.015-0.021 inch spray tip orifice and a minimum spray pressure of 500 psi are recommended). |
| Eco-Fact | Value |
|---|---|
| VOC | < 20 g/l |
| Type | Link |
|---|---|
| Data Sheets | Garla-Block 2k Technical Data Sheet |
| SDS | Garla-Block 2k Safety Data Sheet (Part A) |
| Garla-Block 2k Safety Data Sheet (Part B) | |
Garla-Block 2K’s unique bleed-blocking characteristics preserve the aesthetics of a reflective roof coating.
This formula has a dry time of 2-3 hours at 77°F (25°C) for faster job completion and reduced labor costs.
The Garla-Block 2K formula is low-VOC (<20g/l) and odorless.
Please complete the form below and a member of our team will be back in touch shortly. Or to contact your local Territory Manager directly, use the Find a Rep button at the top of this page.