Fill-Loc Crack Repair is a two component, VOC compliant, 100% epoxy floor patching product. It is designed to make repairs to small vertical and horizontal surface imperfections prior to applying a thin coating. Fill-Loc Crack Repair will quickly fill and span small cracks without slumping. It can also be used to skim coat over small roughed surface areas. If small cracks are not filled, they will telegraph through a coating system and will still be visible cracks. Fill-Loc Crack Repair can be used to fill cracks to help eliminate the collection of soil and other contaminates. This is especially necessary in food processing and high tech industries to meet FDA, USDA and soil contamination restrictions.
|Prior to applying this product, the crack repair area must be clean and dry. All grease, oil and foreign soil must be cleaned out and the crack allowed to dry thoroughly prior to application. Mix Part A with Part B in equal portions (1:1) with a putty knife, spatula or slow speed mixing equipment, i.e. jiffy blade until a uniform gray color is obtained with no streaking. Apply over the cracks with either a trowel or putty knife and smooth tight to the concrete surface. If overcoating with a urethane or epoxy coating system, product should be tack-free (3-5 hours cure time) prior to applying the primers.
|Fill-Loc Crack Repair Technical Data Sheet
|Fill Loc Crack Repair Safety Data Sheet
The fast cure time allows the normal repair process to be completed and coating to commence shortly there after.
Fill-Loc Crack repair is solvent-free, containing zero VOCs. It can be sold anywhere in the country because it applies to all VOC regulations.
Fill-Loc is 100% solids and will not shrink, leaving a noticeable depression.
Provide your email address to receive periodic updates from Garland, including commentary and technical analysis on the issues most important to commercial buildings. We'll also share project highlights of completed building envelope work, and you'll be the first to know about our next innovation.