Accessories

Seal-A-Pore® / WB

Protects Masonry Surfaces
Protects Interior Wall Surfaces
Improves and Preserves Building Appearance

Seal-A-Pore is a solvent-based, silane, and siloxane solution designed to damp-proof above-grade masonry surfaces. Seal-A-Pore is a transparent, colorless, thin liquid. It bars water from exterior masonry (above grade) surfaces without changing the texture of the surface on which it is applied.

Speak with a Rep

Product Specifications

Method	Description
Brush	Once the visual inspection of the test patch is approved, install the first coat of Seal-A-Pore WB at 100 to 200-square-feet per gallon. The application rate can very greatly due to the different porosity ranges that are possible from one masonry substrate to the next. Apply second coat as early as 15 minutes after the initial application. If using a brush, be sure to completely cover the substrate by stroking the brush in both directions.
Spray	Once the visual inspection of the test patch is approved, install the first coat of Seal-A-Pore WB at 100 to 200-square-feet per gallon. The application rate can very greatly due to the different porosity ranges that are possible from one masonry substrate to the next. Apply second coat as early as 15 minutes after the initial application. If spraying, use a coarse round nozzle to ensure a generously wetting out of the surface. Applying the product heavily should have no adverse effect on performance. If desired, an additional coat or touch up coat is acceptable as needed. (If spray applying this product, please see our spray application guide).

Method

Description

Brush

Spray

Once the visual inspection of the test patch is approved, install the first coat of Seal-A-Pore WB at 100 to 200-square-feet per gallon. The application rate can very greatly due to the different porosity ranges that are possible from one masonry substrate to the next. Apply second coat as early as 15 minutes after the initial application. If spraying, use a coarse round nozzle to ensure a generously wetting out of the surface. Applying the product heavily should have no adverse effect on performance. If desired, an additional coat or touch up coat is acceptable as needed. (If spray applying this product, please see our spray application guide).

Eco-Fact	Value
VOC	700 gal./l

Type	Link
Data Sheets	Seal-A-Pore Technical Data Sheet
SDS	Seal-A-Pore WB Safety Data Sheet
SDS	Seal-A-Pore Safety Data Sheet
Application Guidelines	Seal-A-Pore Application Guidelines

Features

Improves and Preserves Building Appearance

Seal-A-Pore is a clear, colorless liquid that does not change masonry appearance. It is self-cleaning; dirt and grim wash off during rainstorms. Seal-A-Pore minimizes masonry staining, flaking, and temporary discoloration caused by absorbed moisture.

How can we help?

Provide your email address to receive periodic updates from Garland, including commentary and technical analysis on the issues most important to commercial buildings. We'll also share project highlights of completed building envelope work, and you'll be the first to know about our next innovation.

Modified Bitumen

KEE / Thermoplastic

Standing Seam Metal Roofing

Wall Panels & Rainscreens

Edge Metal

Restoration Systems

Metal

Asphaltic

Built-Up Roof

Masonry / Concrete

Single-Ply

Wood

Parking Structures

Flooring

Garland's Process

Roof Assessment

Envelope Services

OMNIA Partners

Vizient

Premier Partners

GSA

CMAS (CA)

COMMBUYS (MA)

EducationPlus (MO)

Equalis Group (OH)

Vegetative Roofing

Solar Roofs

K-12

Higher Education

Municipalities

Correctional Facilities

First Responders

Rec Centers & Natatoriums

Architects & Design Professionals

Our History

Press Room

Careers

Accessories

Seal-A-Pore® / WB

Product Specifications

Technical Data

Application

Sustainability

Documents

Features

Protects Masonry Surfaces

Protects Interior Wall Surfaces

Improves and Preserves Building Appearance

Related Products

Green-Lock® Sealant XL

Tuff-Stuff® MS Sealant

LiquiTec

How can we help?