Mastics

Flashing Bond®

Factory Formulation Ensures Uniform Quality
Versatile
Long-Lasting Performance

Flashing Bond is a cold-applied, trowel-grade mastic designed for patching and leak repair on asphalt roofing systems. It contains high-solids content asphalt, additional fiber reinforcement, and plasticizing oils that improve low-temperature performance.

Speak with a Rep

Product Specifications

Method	Description
Trowel	Flashing Bond is ready to use straight from the container. There is no settling or oil separation. In cold weather, store at room temperature to ensure workability. Flashing Bond should be applied to clean dry surfaces. Repairs - Trowel a base coat of Flashing Bond over the area to be repaired. Imbed a strip of Gar-Mesh into the base coat and top dress with Flashing Bond. The top coat should be sufficiently thick so that the weave in the membrane is completely covered (1 gal./7 linear ft. @ 8 in. wide x 1/4 in. deep). Flashing System - As part of a Garland flashing system, Flashing Bond is applied with a multi-ply flashing application beginning with a base ply of Garland two-ply base sheet and followed by one of Garland’s StressPly® family of smooth or mineral membranes as cap sheet. The result is a high performance, multi-ply, modified cold ap - plied flashing system. Apply Flashing Bond at a rate of 4-6 gal./100 sq. ft. (1.6- 2.4 l/m 2), per flashing ply with a 1/8” (3 mm) notched trowel. Bleed out at all overlap edges should be visible to ensure complete contact. The flashing should be mechanically secured at the end of each work day.

Method

Description

Trowel

Flashing Bond is ready to use straight from the container. There is no settling or oil separation. In cold weather, store at room temperature to ensure workability. Flashing Bond should be applied to clean dry surfaces. Repairs - Trowel a base coat of Flashing Bond over the area to be repaired. Imbed a strip of Gar-Mesh into the base coat and top dress with Flashing Bond. The top coat should be sufficiently thick so that the weave in the membrane is completely covered (1 gal./7 linear ft. @ 8 in. wide x 1/4 in. deep). Flashing System - As part of a Garland flashing system, Flashing Bond is applied with a multi-ply flashing application beginning with a base ply of Garland two-ply base sheet and followed by one of Garland’s StressPly® family of smooth or mineral membranes as cap sheet. The result is a high performance, multi-ply, modified cold ap - plied flashing system. Apply Flashing Bond at a rate of 4-6 gal./100 sq. ft. (1.6- 2.4 l/m 2), per flashing ply with a 1/8” (3 mm) notched trowel. Bleed out at all overlap edges should be visible to ensure complete contact. The flashing should be mechanically secured at the end of each work day.

Eco-Fact	Value
VOC	200 g/l
Recycled Content	5.6%

Type	Link
Data Sheets	Flashing Bond Technical Data Sheet
Data Sheets	Flashing Bond WG Technical Data Sheet
SDS	Flashing Bond Safety Data Sheet
	Flashing Bond WG Safety Data Sheet
	Flashing Bond GHS Safety Data Sheet
	Flashing Bond WG GHS Safety Data Sheet

Features

Factory Formulation Ensures Uniform Quality

Flashing Bond is factory formulated under rigid quality control conditions to ensure uniform product quality. This eliminates the variables inherent on the job site preparation of roof materials where quality control depends on the individual roofer’s expertise.

Long-Lasting Performance

Flashing Bond is double-reinforced to outlast and outperform conventional roof cement. Long-strand fibers provide inherent reinforcement and eliminate run or sag in vertical surface applications. Flashing Bond should be used in conjunction with Gar-Mesh® as the reinforcing membrane for the roof repair, which will reinforce Flashing Bond as steel rods reinforce concrete.

Get in Touch

Please complete the form below and a member of our team will be back in touch shortly. Or to contact your local Territory Manager directly, use the Find a Rep button at the top of this page.

Man Working Laptop Connecting Networking Concept

Modified Bitumen

KEE / Thermoplastic

Standing Seam Metal Roofing

Wall Panels & Rainscreens

Edge Metal

Metal Accessories

Restoration Systems

Metal

Modified Bitumen Roof Surface Coatings

Facades / Walls

Garland's Process

Roof Assessment

Envelope Services

OMNIA Partners

Vizient

Premier Partners

GSA

CMAS (CA)

COMMBUYS (MA)

EducationPlus (MO)

Equalis Group (OH)

Vegetative Roofing

Solar Roofs

K-12

Higher Education

Garland Federal Division

Garland Federal Partner Program

Municipalities

Correctional Facilities

First Responders

Rec Centers & Natatoriums

Architects & Design Professionals

Mastics

Flashing Bond®

Product Specifications

Technical Data

Application

Sustainability

Documents

Features

Factory Formulation Ensures Uniform Quality

Versatile

Long-Lasting Performance

Related Products

Silver-Flash®

All-Sil™ Silicone Sealant

Weatherking® Flashing Adhesive

Get in Touch