Garla-Prime VOC is a solvent-based asphalt roof primer and conditioner that can restore aged and dry felts to provide a better bonding surface. Garla-Prime VOC provides a suitable bonding surface over metal, concrete, built-up, prepared gravel, and modified bitumen roof surfaces. Garla-Prime VOC’s penetrating oils help replace the asphaltic oils an existing roof surface has lost through weathering. The oils restore flexibility to the existing roof surface and seal dust that may be present after standard cleaning operations.
|
| Method | Description |
|---|---|
| Brush | Garla-Prime VOC may be applied by brush, roller, or spray at 0.5 - 1.0 gal./100 sq. ft. (0.20-0.30 l/m2). Avoid over-application and build-up of primer. Brush or roll out any excess material immediately after application. |
| Roller | Garla-Prime VOC may be applied by brush, roller, or spray at 0.5 - 1.0 gal./100 sq. ft. (0.20-0.30 l/m2). Avoid over-application and build-up of primer. Brush or roll out any excess material immediately after application. |
| Spray | Garla-Prime VOC may be applied by brush, roller, or spray at 0.5 - 1.0 gal./100 sq. ft. (0.20-0.30 l/m2). Avoid over-application and build-up of primer. Brush or roll out any excess material immediately after application. |
| Eco-Fact | Value |
|---|---|
| VOC | < 350 g/l |
| Type | Link |
|---|---|
| Data Sheets | Garla-Prime VOC Technical Data Sheet |
| SDS | Garla-Prime VOC Safety Data Sheet |
| Garla-Prime VOC GHS Safety Data Sheet | |
Garla-Prime VOC has been formulated to comply with Air Quality Management District regulations. The asphalt base of Garla-Prime VOC meets the requirements of ASTM D41-11.
Garla-Prime VOC completely dries in approximately 1 hour at 77°F (25°C) at 50% or less humidity, depending on the thickness of the application. High humidity, cool temperatures, and thicker applications will increase drying time.
Garla-Prime VOC application conserves finishing material by conditioning the surface and eliminating the tendency of the finishing material to absorb into the dried-out, existing surface.
Please complete the form below and a member of our team will be back in touch shortly. Or to contact your local Territory Manager directly, use the Find a Rep button at the top of this page.