Base and Ply Sheets

SA Base IV

Low Labor
Ease of Installation
Security in Multi-Ply Construction

SA Base IV is an easy-to-apply, self-adhering, Styrene-Butadiene-Styrene (SBS), fiberglass-reinforced modified bitumen base sheet explicitly designed with the StressPly® IV torch-applied membrane roof system. This strong adhesive backing with a peel-off release film makes this base sheet quick and simple to install, helping to save time and money.

Speak with a Rep

Product Specifications

Method	Description
Self-Adhered	Before installing base sheets, prime approved roof board with Garland SA Primer. Starting at the low point of the roof, unroll SA Base IV in the desired position. Fold the membrane length-wise back onto itself, remove the split-back release film from the exposed side, and gradually push the membrane into place. Apply even pressure along the entire length of the membrane from the center to outer edges to avoid air pockets or wrinkles. Repeat for the other side. Firmly apply pressure with a suitable weighted roller to ensure 100% adhesion. The base sheets are installed in a shingle fashion throughout the prepared substrate. See SA Base Application Guide for detailed instructions.

Method

Description

Self-Adhered

Before installing base sheets, prime approved roof board with Garland SA Primer. Starting at the low point of the roof, unroll SA Base IV in the desired position. Fold the membrane length-wise back onto itself, remove the split-back release film from the exposed side, and gradually push the membrane into place. Apply even pressure along the entire length of the membrane from the center to outer edges to avoid air pockets or wrinkles. Repeat for the other side. Firmly apply pressure with a suitable weighted roller to ensure 100% adhesion. The base sheets are installed in a shingle fashion throughout the prepared substrate. See SA Base Application Guide for detailed instructions.

Physical Property	Value
Tensile Strength	MD 75 lbf./in. (13 kN/m) XD 50 lbf./in. (9 kN/m)
Tear Strength	MD 105 lbf. (467 N) XD 100 lbf. (445 N)
Elongation	MD 5% XD 5%
Low-Temp Flex	0°F (-18°C) Pass

Type	Link
Data Sheets	SA Base IV Technical Data Sheet
Benefits	SA Base IV Benefits
Application Guidelines	SA Base IV Application Guideline

Features

How can we help?

Provide your email address to receive periodic updates from Garland, including commentary and technical analysis on the issues most important to commercial buildings. We'll also share project highlights of completed building envelope work, and you'll be the first to know about our next innovation.

Modified Bitumen

KEE / Thermoplastic

Standing Seam Metal Roofing

Wall Panels & Rainscreens

Edge Metal

Restoration Systems

Metal

Asphaltic

Built-Up Roof

Masonry / Concrete

Single-Ply

Wood

Parking Structures

Flooring

Garland's Process

Roof Assessment

Envelope Services

OMNIA Partners

Vizient

Premier Partners

GSA

CMAS (CA)

COMMBUYS (MA)

EducationPlus (MO)

Equalis Group (OH)

Vegetative Roofing

Solar Roofs

K-12

Higher Education

Municipalities

Correctional Facilities

First Responders

Rec Centers & Natatoriums

Architects & Design Professionals

Our History

Press Room

Careers

Base and Ply Sheets

SA Base IV

Product Specifications

Technical Data

Application

Physical Properties

Documents

Features

Security in Mult-Ply Construction

Low Labor

Ease of Installation

Related Products

StressPly® IV Plus / IV Plus Mineral / IV Plus UV Mineral

Pro-Stop™ FR

Tuff-Stuff® MS Sealant

How can we help?